Easy Application:
- Find your sweet spot. (we recommend centered on lower half)
- Clean area with alcohol swab (provided)
- Let it dry for 1 minute
- Peel adhesive backing and place on desired location
- Press firmly for 20-30 seconds
- For maximum bond strength, we recommend minimal use for 48-72 hours. (additional 3M adhesive is included)
Step by step. Move by Move:
1. Clean the back of your phone or phone case with a little alcohol and a rag
2. Before pealing the adhesive, make sure to position it in the best area for you! We usually suggest in the lower middle of the phone at texting level in order to get maximum performance from both hands. But if you are right handed or a left handed and use your phone more often with either hand, we suggest to slightly slide it to your preferred side for maximum performance with your dominant hand!
3. Peel the adhesive off of the iTongue. (Remember the iTongue is RE-usable but the adhesive is not! If you need to purchase additional adhesive contact us.
4. Place on your preferred area on your phone. Then, press firmly all around the iTongue to assure placement.
5. NOW, Enjoy the Journey of discovering the easiest and most elegant
way to move through your phone!